TNM Anchor
Publish Time: 2023-01-10 Origin: Site
Tianjin soright supply many kinds of torque anchor, tubing anchor, gas anchor.
The TNM anchor is special for PCP pump well，Without lifting and putting down to seat seal. It has good centering performance, the tubing and sucker rod in the well is still in vertical status to avoid the tubing being worn with sucker rods. Easy operation, good stability performance.The 3 block is anchored in the inner wall of the casing is supported by the spring，Cam fastening，Uniform stress，The casing damage is less，Avoid the tubing tripping，The greater the reverse torque, the greater the anchoring force，Torque up to 3000N •m，Anchor firm，On the special gas H2S, CO2, aromatic hydrocarbon, has good corrosion resistance。And easy to use, safe and reliable.
Model |
Casing OD |
Scope of work |
Thread | |
mm | inch | NUE, EUE | ||
TNM-512 | 5″ | 120-128 | 4.72-5.03 | 2-3/8”, 2-7/8”, 3-1/2”, 4-1/2” |
TNM-658 | 6″ | 146-154 | 5.75-6.06 | |
TNM-700 | 7″ | 156-163 | 6.14-6.41 | |
TNM-958 | 9″ | 192-224 | 7.55-7.87 | |
Product structure:
By the body、Camshaft、The anchoring card block、Coupling Etc.