Views: 12 Author: Site Editor Publish Time: 2023-02-14 Origin: Site
Gas anchor is designed for the separation of gas from the oil during pumping it by rod pumps. Gas anchors are screwed on the tubing under the pump and it is external suction pipe. To the bottom of anchor is attached muffled by cap pipe tubing, and pump inlet is screwed into the inner suction tube that extends to the bottom (muffled) pipe tubing.
2-3/8, 2-7/8, 3-1/2, 4-1/2
5-1/2, 6-5/8, 7, 9-5/8
1) Gas separation
2) Increasing Production
3) Preventing gas locking
4) Increasing pump rate/ Pump efficiency and pump rate will be increased.